How Many Peel and Stick Tiles Do I Need? A Simple Coverage Guide
by LiviTile
You've found the perfect pattern. You can already picture it behind the sink. Now comes the question every DIYer asks at this point: how many sheets do I actually need?
Good news — it's simple math, and you don't need to be a math person. Grab a tape measure and a cup of coffee, and let's figure it out together.
Step 1: Measure your space
Measure the area you want to cover in inches:
- Width: from one edge to the other (for example, wall corner to wall corner, or the length of your countertop).
- Height: from the countertop (or the floor of the area) up to where you want the tiles to stop — the bottom of your upper cabinets, a window ledge, or a height you mark yourself.
If your space is an L-shape or has a section with a different height (like a taller section next to a window), split it into simple rectangles and measure each one separately. You'll add them up at the end.
Tip: Measure twice, in a couple of spots. Walls and counters aren't always perfectly straight, so use the largest number you find.
Step 2: Work out the square footage
Multiply width × height to get square inches, then divide by 144 to turn it into square feet:
Square feet = (width in inches × height in inches) ÷ 144
Example: a kitchen backsplash 60 in wide and 18 in tall is 60 × 18 = 1,080 square inches. 1,080 ÷ 144 = 7.5 sq ft.
Don't subtract windows or outlets unless they're large. Small gaps like outlets get absorbed by your extra-sheets buffer anyway.
Step 3: Divide by the coverage per sheet
This is where sheet size matters.
- Most LiviTile designs are about 12 × 12 in (305 × 305 mm), so each sheet covers about 1 sq ft. That makes the math easy: square feet ≈ number of sheets.
- Confetti Brick is a little different. Each sheet is 9.5 × 11.7 in (241 × 298 mm), which works out to about 0.77 sq ft per sheet. Divide your square footage by 0.77 to find how many sheets you need.
Using our 7.5 sq ft backsplash:
- With a 12 × 12 in design: 7.5 ÷ 1 = 7.5 sheets → round up to 8.
- With Confetti Brick: 7.5 ÷ 0.77 = 9.7 → round up to 10.
Step 4: Add about 10% extra
Real walls have corners, edges, outlets and that one awkward spot next to the fridge. You'll trim some sheets, and patterned tiles sometimes need a little extra so the design lines up nicely across seams.
We suggest adding about 10% to your sheet count, and rounding up. For busy, all-over patterns like patchwork or mosaic, 10% is usually plenty. For geometric designs like checkerboard, where alignment really shows, you may want a touch more.
Back to our example:
- 12 × 12 in design: 8 sheets + 10% ≈ 9 sheets
- Confetti Brick: 10 sheets + 10% = 11 sheets
Having a spare sheet or two tucked away is also handy if you ever need to patch a spot later.
Step 5: Pick your pack
LiviTile sheets come in 5-sheet or 10-sheet packs.
So for our 60 × 18 in backsplash:
- A 12 × 12 in design needing 9 sheets → one 10-sheet pack.
- Confetti Brick needing 11 sheets → one 10-sheet pack + one 5-sheet pack. Remember, standard US shipping is free on orders of $70 or more.
Quick reference: common spaces
Here are a few typical sizes to help you estimate. Always measure your own space — these are just starting points for 12 × 12 in designs.
| Space | Example size | Sq ft | Sheets (incl. ~10%) | Suggested pack |
|---|---|---|---|---|
| Small bathroom vanity backsplash | 30 × 18 in | 3.75 | 5 | 1 × 5-sheet |
| Coffee-bar nook | 30 × 30 in | 6.25 | 7–8 | 1 × 10-sheet |
| Standard kitchen backsplash run | 60 × 18 in | 7.5 | 9 | 1 × 10-sheet |
| Laundry room wall strip | 72 × 24 in | 12 | 14 | 1 × 10 + 1 × 5 |
| Small accent wall | 48 × 48 in | 16 | 18 | 2 × 10-sheet |
For Confetti Brick, divide the sq ft column by 0.77 instead, then add 10%.
Mixing patterns? Plan each area separately
Love two designs? Some people use one pattern behind the sink and a coordinating one on the coffee-bar wall, or tile a feature stripe in a contrasting design. Just measure and calculate each area on its own, then round up each one. It's easier to keep track, and you won't end up short on the pattern you like most.
Before you order: a quick checklist
- ✅ Measured width and height (in a couple of spots)
- ✅ Split odd shapes into rectangles
- ✅ Converted to square feet (÷ 144)
- ✅ Divided by coverage per sheet (1 sq ft, or 0.77 for Confetti Brick)
- ✅ Added about 10% and rounded up
- ✅ Picked 5-sheet and/or 10-sheet packs
A note on timing
LiviTile ships to the US only. Orders ship within 2 days of payment from Zhuhai, China, and standard delivery takes about 11–14 days, counted from payment. If you're planning your refresh around a date — guests arriving, a move-in day, a holiday — it's worth ordering a little early, and ordering everything you need at once so all your sheets arrive together.
Ready to start?
Browse All Wall Tiles to find a pattern that feels like you, or check our FAQ for application and care tips. Still not sure about your numbers? Email your measurements to livitile@gmail.com and we'll help you work it out.
A little tile. A whole new feeling. Happy refreshing!